Single-back fireproof gates
Have been tested in the State Center of Certification of fireproof production of Emergency Control Ministry.
With fireproof endurance ЕI 30:
- single-back double-leaf tight;
- single-back double-leaf with glassed-in area under 0,1 square meters.
With fireproof endurance ЕI 60:
- single-back double-leaf tight;
- single-back double-leaf with glassed-in area under 0,1 square meters;
- traversing single-leafed tight;
- traversing double-leaf tight.
AREA
OF APPLICATION
The area of the obligatory using of
fire-prevention gates is a production shop, trade and storage
premiseses, which are made great demands on fire safety, where exists a
need of division of the premiseses during fire on several zones.
Control:
- mechanic
- automatic/ remote control
The block of gates consists of frame, blade of gates and special accessories. The blade of gates presents a design, consisting of metallic sheet, filled with heat-insulating material. The blade is fixed up to box by means of three escalated hinges. On the part of hinges on the blade there are installed two girth rails, when closing the gates falling into gates frame, providing more reliable fixation of the gates in frame. The gates are produced both "tight", and with block fire-prevention glass cover, with area under 0,1 square metres. On perimeter of the gates winch is smeared with heat-expanding tape, which increases in volume under the fire, preventing spreading the carbon monoxide. The gates can be made with wicket (the sizes in light 800х2000(N) mm).
THE SET OF GATES MAY INCLUDE:
- signal lamp
- siren
- photoelements
- remote control
- key-switch
- autonomous battery - has restriction of the leafs weight
Automatic fireproof gates are produced at individual offer.